yacht joiner Archives - Loxaco, Inc

131′ Horizon Jacuzzi Teak Steps

Jake — Thu, 17 Dec 2020 11:14:01 +0000

131′ Horizon Jacuzzi Teak Steps On this project, I assisted another yacht woodworking company with the replacement of the teak steps on the sundeck jacuzzi. They provided me with the templates and material and commissioned me to build the new teak steps. Laying out the pieces With the templates in […]

The post 131′ Horizon Jacuzzi Teak Steps appeared first on Loxaco, Inc.

80′ Azimut – Water Damaged Wood Repairs

Jake — Tue, 24 Nov 2020 10:38:55 +0000

Water damaged parts replacement I was brought in on this 80′ Azimut to replace some parts that had been water damaged. There was a problem with condensation from the galley fridge which was repaired and now they were looking to get the woodwork squared away. There were 3 smaller base […]

The post 80′ Azimut – Water Damaged Wood Repairs appeared first on Loxaco, Inc.

Mahogany and Maple Floor

Jake — Mon, 23 Nov 2020 12:26:30 +0000

Mahogany and maple floor For this project, I was assisting another local yacht woodworking company. My task was to take the one and a half sheets of sapele mahogany veneered plywood and inlay solid maple strips every 1 3/8″. These panels were then going to be used for the floor […]

The post Mahogany and Maple Floor appeared first on Loxaco, Inc.

61′ Viking – Radius Teak Bed Rail Corners

Jake — Sat, 21 Nov 2020 12:08:20 +0000

Missing radius corners I was called out to look at adding teak radius pieces to the radius corners on the master berth and VIP berth bed rails. From the factory, the teak bed rail was applied only to the straight runs while the radius ends were left exposed. Milling the […]

The post 61′ Viking – Radius Teak Bed Rail Corners appeared first on Loxaco, Inc.